18
August 14, 2001
AM 259777 Rev.00 PDF
System Installation Instructions
Installing the TV on/off detector
The TV on/off detector senses whether your TV is on or off and enables the media center to
automatically switch your TV on and off as needed. If this device is not installed, you will need
to turn your TV on and off using the remote control that came with your TV.
• Attach the TV on/off detector to the back of your TV using the mounting strip included with
• Plug the connector on the end of the cord into the TV SENSOR jack on the back of the
media center.
Note:
This device will work correctly only after your system is programmed to operate your
brand of TV. See “Programming your remote control to control your TV” in your operating
guide.
Note:
If you have a projection TV, mount this device on the lower back portion of the enclo-
sure opposite the connector panel.
Note:
This device will not work with LCD and plasma TVs.
Figure 16
TV on/off detector installed
on your TV
TV
SENSOR
IR
EMITTER
SERIAL
DATA
SPEAKER
ZONES
1
2
1.1A
33V
DC POWER
AM
FM
75
ANTENNA
OPTICAL
OPTICAL
INPUT
OUTPUT
AUDIO OUTPUTS
DIGITAL
DIGITAL
R
L
RECORD
DIGITAL
R
L
DIGITAL
R
L
DIGITAL
R
L
DIGITAL
R
L
TAPE
AUDIO INPUTS
AUX
VCR
TV
Back of TV
TV SENSOR jack
TV
on/off detector
Media center rear panel