Bose Lifestyle 40, Руководство пользователя

Страница: 21 / 48

English
AM189858_03_V.pdf December 20, 2001 19
Operating Your Lifestyle
®
40 Music System
Press and hold here to store a preset or, to quick-store a preset, press
and hold any button 1 through 9.
Receiving AM stations
Normally, the AM radio receives sufficiently strong AM stations using a wide bandwidth filter.
If you experience difficulty tuning to a weak AM station, you can force the AM tuner to use a
narrow bandwidth filter to eliminate interference from other stations.
To force the tuner to use a narrow bandwidth filter, press and hold the center of the station
display until you hear a low-pitched beep. To switch back to the wide bandwidth filter, press
and hold until you hear a high-pitched beep. Retuning the station cancels any forcing.
Seeking the strongest stations
Press either the or SEEK arrow button to tune to the next strong station.
Selecting a preset station
You can select a preset station using the or PRESET arrow buttons or the KEYPAD.
To use the KEYPAD, press the KEYPAD button until the indicator arrow points toward
PRESET . Then enter the number of the preset station you want.
Note: If you have not selected a valid preset location, the system remains at the current
setting.
Setting a station preset
Your Lifestyle
®
system can store up to 25 FM and 25 AM station presets. You can set presets
using the STORE button, KEYPAD, preset number display area, or PRESET menu.
Setting a preset using the STORE button
During normal AM/FM radio operation when the keypad is not displayed, you can see the
STORE button at the bottom of the screen. To store a preset in the next available location,
press and hold the STORE button until the music center beeps and the new preset number
appears.
Note: If all presets are full, the STORE button is not shown.
Using the KEYPAD to quick-store presets
You can quick-store presets in locations 1 through 9. Hold down any KEYPAD number button
from 1 to 9 until the music center beeps and the new preset number appears.
Setting a preset using the preset number display
You can quick-store a station using the PRESET number display. Press and hold down the
display area between the PRESET arrow buttons (dashes or a preset number are displayed)
until the system beeps. After the beep, the new preset number is shown. This stores a new
preset at the next available preset number. Use the PRESETS menu (page 20) if you want to
change a preset to a different station.
Note: If the display says FULL after pressing the PRESET number display area, no more
presets are available. See “Erasing a preset station” on page 20.
Figure 21
Setting presets using the preset
number display or KEYPAD