41
Disassembly Procedures
5.2
Remove the four screws that secure the
power amplifier / SMPS PCB assembly to
the power stand’s mounting bracket.
5.3
Carefully slide the power amplfier / SMPS
PCB downward until the top of the board
clears the upper part of the bracket.
5.4
Slide the PCB assembly out through the
access panel opening and disconnect the
four wire harnesses. Lift out the board.
Re-assembly Note:
The power amplifier /
SMPS PCB assembly with the heatsink
attached should slide up between the plastic
cabinet housing and the metal cavity bulk-
head bracket. Once it is in the correct loca-
tion, secure it in place with the four screws
removed in step 5.2.