Bose CVT-5, Руководство пользователя

Страница: 4 / 14

4
Attaching The CVT-5 Transformer To
The
502
® A Array
1. Use a Phillips head screwdriver to remove the
four screws that secure the connector plate to
the rear of the 502A array (Figure 2).
2. Use a small slot screwdriver to carefully pry the
connector away from the rear baffle. Pull it out a
short distance (Figure 3).
3. Use wire cutters to cut the two wires near the
solder terminals on the inside of the connector
panel (Figure 3). Put the panel aside.
4. Strip 1 ¦
2
" (12 mm) of insulation from the end of the two wires
inside the 502A array.