background image

5

S

ETTING

 U

P

English

Français

Español

Placing your speakers to achieve realistic home theater sound

Keep these guidelines in mind when choosing a location for each speaker:

• The Acoustimass

®

 module should be at least 2 feet (.6 m) from your TV set to prevent 

interference.

• All of the small speakers are magnetically shielded to prevent interference with a TV picture.

• Select a stable and level surface for each of the small speakers. 

Vibration can cause them to move, particularly on smooth surfaces like marble, glass, or 
highly polished wood. To prevent this problem, rubber feet are provided for attachment to 
the bottom of the center front speaker. 

Note: 

You may order additional rubber feet, free of charge, by contacting Bose. Refer to the 

address list included in the carton.

• In an Acoustimass 10 system, the center front speaker is for use at the front of the room 

and near the center of your TV. The other cube array speakers are identical and can be 
placed interchangeably around the room (Figure 2a and 2b).

• The top and bottom cube on each cube array speaker can be rotated to create 

room-filling sound patterns. 

• In the Acoustimass 6 system, all five single cube speakers are identical and can be placed 

interchangeably around the room (Figure 2c and 2d).

The shape and size of your room and location of the furniture in it will affect your choice of 
speaker locations. Use the examples below as the basis, but not the rule, for your home 
theater setup.

Figure 2

Sample speaker placement 
(a and c) and performance 
results (b and d)

Acoustimass 10 Series IV system

Acoustimass 6 Series III system

a.

b.

c.

d.

03_Setup.fm  Page 5  Tuesday, March 21, 2006  4:05 PM

Содержание Acoustimass 10 Series IV

















Отзывы: