background image

PRO.BOSE.COM/

L1

5

OF 9

Connections and Controls

q

  Standby Button:

 Press the button to 

power on the Sub. The LED will illuminate 
white while the Sub is on.

w

  Line Inputs:

 Analog input for connecting 

an L1 Pro or other line-level audio source. 
Compatible with XLR, TRS balanced, and 
TS unbalanced cables.

e

  Line Outputs:

 Use an XLR cable to 

connect the line-level output to a 
loudspeaker.

r

  SubMatch Thruput:

 Connect an additional 

Sub bass module with a SubMatch cable. 
Up to two Sub1 or Sub2 powered bass 
modules can be powered by a single L1 
Pro32 via SubMatch connection.

t

  Power Input Cover:

 Prevents 

simultaneous use of the 

SubMatch Input

 

and 

Power Input

. Slide the cover to reveal 

the power input that is needed for setup.

y

  SubMatch Input:

 Connect the Sub to an 

L1 Pro32 with a SubMatch cable. 

u

  Power Input:

 IEC power cord connection.

i

  USB Port:

 USB-C connector for Bose 

service use and firmware updates. 

Note:

 This port is not compatible with 

Thunderbolt 3 cables.

o

  Line Output EQ:

 Select between 

FULL

 

bandwidth or a multi-purpose HPF when 
using 

Line Outputs

. Press the button to 

switch EQ settings. The corresponding 
LED will illuminate white while selected.

a

  Line Input EQ:

 Select between an 

optimized EQ for an L1 Pro or a multi-
purpose LPF when using 

Line Inputs

Press the button to switch EQ settings. 
The corresponding LED will illuminate 
white while selected. 

s

  Signal/Clip Indicator:

 The LED will 

illuminate green when a signal is present 
and will illuminate red when the signal is 
clipping or the Sub is entering limiting. 
Reduce the level or signal volume to 
prevent signal clipping or limiting.

d

  Level Control:

 Adjust the level of audio 

output. The

 Level Control

 does not affect 

the 

Line Outputs

. The 12 o’clock position 

is recommended when in use with an 
L1 Pro32.

f

  Phase/Pattern Button:

 Adjust the polarity 

of the Sub. Press the button to switch 
polarity. The corresponding LED will 
illuminate white while selected. Also 
allows access to Cardioid mode when 
using two identical Sub modules.

LINE IN 1

LINE IN 2

LINE IN EQ

LINE OUT 1

LINE OUT 2

LINE OUT EQ

PHASE/PATTERN

LEVEL

LPF

L1

FULL

HPF

SUBMATCH

THRU

SUBMATCH

IN

CARDIOID

q

w

e

o

a

s

d

i

r

t

y

f

u

Содержание 840918-1100










Отзывы: