Bosch XQG100-WDU286H1AW, Руководство пользователя

Страница: 57 / 64

Troubleshooting
en
57
Fault Cause and troubleshooting
The laundry is too
damp. Thick and multi-layered fabrics require a longer drying
time.
▶
Set a timed programme for the subsequent drying.
→
"Programmes", Page 27
Fan noise during the
washing phase. Process fan is active.
▶
Not a fault – normal operating noise.
Longer, whirring noise
before the start of the
wash cycle or fabric
softening. Intelligent dosing system dispenses detergent or care
products.
▶
Not a fault – normal operating noise.
Brief whirring noise
after switching on the
appliance. Intelligent dosing system carries out a function test.
▶
Not a fault – normal operating noise.
The programme dura-
tion changes during
the wash cycle. The programme operation is optimised electronically.
This may change the programme duration.
▶
Not a fault – no action required.
The unbalanced load detection system eliminates an
imbalance by repeatedly redistributing the laundry.
▶
Not a fault – no action required.
Note:
When loading, where possible, place large and
small items of laundry together in the drum. Different
sized items of laundry distribute themselves better
during the spin cycle.
Foam detection system switches on a rinse cycle if
foam build-up is too high.
▶
Not a fault – no action required.
Drum jerks after the
programme starts. This is caused by an internal motor test.
▶
Not a fault – no action required.
Rushing, hissing
noise. Water is flushed under pressure into the detergent
drawer.
▶
Not a fault – normal operating noise.
cannot be oper-
ated.
Drying phase active.
▶
Not a fault – no action required.