MAN-WZ16-02
Precautions
•
Do not put objects inside the unit. Make sure that no metal objects or flammable substances
enter the camera. This may cause fire, short-circuits and other damages.
•
Be careful when handling the unit. To prevent damage, do not drop the camera or subject it to
strong shock or vibration.
•
Install the camera away from electric or magnetic fields.
•
Protect the camera from humidity and dust.
•
Do not subject the unit to high temperature. Be careful when installing close to ceilings, in a
kitchen or a boiler room as heat rises and will affect the camera.
•
Dirt can be removed from the camera by wiping it with a clean soft moistened cloth and soft
detergent solution.
•
The mounting surface material must be strong enough to secure the camera.
Troubleshooting
Before sending the camera out for repair, check the questions below. If the problem persists after
checking these questions, contact Bosch Security Systems, Inc.
If no image appears
•
Is the coaxial cable firmly attached?
•
Is power and voltage at a normal level?
•
Is the monitor correctly adjusted?
•
Is there adequate illumination?
If the image is unclear
•
Is the lens in focus?
•
Is the lens dirty?
Installation
