operation
en
31
13.8 Starting the programme
Requirement:
A programme is set.
"Setting a programme", Page 29
▶
Press
Start/Nachlegen
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows the programme
duration or the programme end
time.
a
After the programme has ended,
the display shows:
End
.
13.9 Changing the activated
programme end time
You can repeatedly change the set
and activated programme end time
before starting the programme.
Requirements
¡
The programme is set.
→
"Setting a programme", Page 29
¡
The programme end time is set
and activated.
→
1.
Press
Start/Nachlegen
.
The activated programme end time
is paused.
2.
Press
Fertig in
until the display
shows the required programme
end time.
3.
Press
Start/Nachlegen
.
The changed programme end time
is activated.
13.10 Soaking laundry
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
Start/
Nachlegen
.
3.
To resume the programme, after
the desired soaking time, press
Start/Nachlegen
.
13.11 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
1.
Press
Start/Nachlegen
.
The appliance pauses.
Note:
If you want to add laundry,
follow the instructions on the dis-
play.
→
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press
Start/Nachlegen
.
13.12 Cancelling the pro-
gramme
1.
Press
Start/Nachlegen
.
2.
Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Spülen
programme.
– If the water level is high, start
the
Schleudern
programme or
select a suitable programme for
draining.
→
3.
Remove the laundry.
→