Bosch WTYH7709ES, Инструкция по установке и эксплуатации

Страница: 31 / 44

Home Connect
en
31
Connecting to your home
network manually
If you have already automatically
connected your appliance to your home
network, you can skip the manual
connection step and connect it to the
Home Connect app
~
Page 31 .
If your router does not have a
WPS function, you will need to connect
the appliance to your home network
manually.
Wi-Fi must be switched on at the
appliance.
1.
Switch the appliance on.
2.
Press and hold the
Remote Start
}
button for more than three seconds.
Aut. network log-in
appears in the
display panel.
3.
Use either of the left-hand arrow
buttons to select
Man. network log-
in
.
4.
Use either of the right-hand arrow
buttons to select
Connect
.
The appliance will now set up its
own Wi-Fi network with the name
(SSID)
HomeConnect
, which you
can access from your smartphone or
tablet PC.
5.
Call up the Wi-Fi settings on your
smartphone or tablet PC.
6.
Connect your smartphone or
tablet PC to the
HomeConnect
Wi-
Fi network and enter the Wi-Fi
password (key) "
HomeConnect
".
Note:
The connection process may
take up to 60 seconds.
7.
Once you have connected
successfully, open the
Home Connect app on your
smartphone or tablet PC.
8.
In the Home Connect app, enter the
name (SSID) and password (key) for
your home network
and then select
Transfer to appliance
.
If the appliance has successfully
connected to the home network,
Connected
è
appears in the display
panel.
9.
You can exit the Home Connect
settings by selecting the
Remote
Start
}
button.
Notes
■
If you were not able to establish a
connection, check whether your
appliance is within range of the
home network and repeat the
manual connection.
■
If your smartphone or tablet PC is
still connected to the
HomeConnect
network, you will need to connect it
to your home network first.
Connecting to the Home
Connect app
If your appliance is connected to your
home network, you can connect it to the
Home Connect app.
1.
Switch the appliance on.
2.
Wait until the
|
symbol appears in
the display panel.
+DXSWPHQ
0DQQHWZRUNORJLQ 1RWFRQQHFWHG
$XWQHWZRUNORJLQ
&RQQHFWWRWKHDSS
&RQQHFW
+DXSWPHQ
0DQQHWZRUNORJLQ &RQQHFW
$XWQHWZRUNORJLQ
&RQQHFWWRWKHDSS
1RWFRQQHFWHG