Bosch WTY88701AU, Руководство по эксплуатации, Страница: 8 / 10

ʑ
a
a
ʑ
a
ʑ
L ü ü
+c
ü ü ü ü
ü ü ü ü
ü ü ü ü
|
c
ü ü ü ü
ü ü ü ü
ü ü ü ü
I ü
+c
ü ü ü ü
ü ü ü ü
L
ü ü ü
+c
ü
10
Normal noises
During drying, the compressor and the pump generate some noise which is entirely normal.
The compressor in the dryer may
occasionally generate a humming noise.
The volume and pitch of this may vary
depending on the selected
programmes and the progress of the
drying.
The compressor in the dryer is ventilated
from time to time, which creates a whirring
sound.
The automatic cleaning process causes
a clicking noise.
The process of pumping the condensation
into the condensate container generates
pumping noises.
11
What to do if ...
If you cannot rectify a fault yourself (e.g. by switching the dryer off/on), please contact our
after-sales service.
We will always find an appropriate solution and will avoid unnecessary visits by engineers.
Trust the expertise of the manufacturer and rest assured that the repair will be carried out by
trained service technicians using original spare parts.
The contact details of your local
after-sales service can be found in the enclosed after-sales
service directory:
–
GB 0344 892 8979 (Calls charged at local or mobile rate.)
– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please specify the product number (E-Nr.)
and production number (FD) of your appliance(see inside of door).
Switch the dryer off using the programme selector and unplug the mains plug from
the socket.
ʠ
Please empty condensate
container
is displayed.
Emptying the condensate container
a
Page 4.
Press any button.
Press the
$
Start /Pause button again.
ʠ
Please empty condensate
container
is displayed and the
drying cycle is interrupted.
Is the condensation drain installed?
a
Condensation
drain hose blocked
a
check and clean the hose.
Stopper in the condensate container?
a
separate
Instructions for condensation drain.
Is the filter in the condensate container dirty?
a
Clean
the filter in the condensate container
a
Installation
and maintenance instructions, Page 3.
ʠ
Residual water in
the condensate container
despite the dryer being
connected to the condensation
drain. Not a fault. If the condensation drain is installed, residual
water remains in the condensate container due to
the dryer's self-cleaning function.
ʠ
Please clean lint filter is
displayed.
Clean the fluff filters
a
Page 4 .
Press the
$
Start /Pause button again.
ʠ
Dryer does not start. Has the
$
Start /Pause button been pressed?
Door closed?
Ambient temperature greater than 5°C? The optimum
ambient temperature for drying is between 5 °C and
35 °C.
ʠ
Water is leaking out. Make sure the dryer is level.
Push the condensate container back in until it locks fully
into place.
ʠ
ʠ
a
a
a
a
ʠ
ʠ
ʠ
ʠ
a
a
a
a
a
a
a
a
a
a
a
a