Bosch WTX87MW9GR, Инструкция по установке и эксплуатации

Страница: 31 / 52

Draining the condensation water
en
31
Settings:
Adjust and activate/deactivate the
basic settings as follows
1.
Position of the required basic
setting.
2.
Change the setting using:
M N
3.
Adjust any additional basic settings
you require or save and exit the
basic settings.
Save and exit the basic settings as
follows
Switch off the appliance.
Note:
The selected settings are
retained even after the appliance has
been switched off.
Œ
Draining the
condensation water
Draining the condensation water
Condensation will form in the appliance
as it dries the laundry.
You must ensure that the drain hose is
connected when you operate the
appliance.
If there is no drain hose connected to
the appliance, the condensation water
from the appliance will run into the
condensation container. In this case,
you will need to empty the condensation
container each time the dryer finishes
drying the laundry, and also if it
becomes full before drying is complete.
Connect the drain hose as follows:
1.
Remove any accessories from the
drum.
2.
Remove all items from the bag.
0 Off
1 Low
2 Medium
3 High
4 Very high