Appliance settings
en
39
3.
Push the condensation container
back into the appliance until you feel
it lock into place.
Note:
The filter in the condensation
container filters the condensation water,
which is used during the appliance's
automatic cleaning cycle. The filter is
cleaned by emptying out the
condensation water. You should still
check the filter regularly for any build-
up, and remove this if necessary.
condensation container" on page 61
2
Appliance settings
Appliance settings
You can activate/deactivate the
childproof lock and adjust the basic
settings (e.g. signals).
Childproof lock
Activating the childproof lock prevents
the settings from being accidentally
changed on the control panel.
Activate/deactivate the childproof lock
as follows
:
Press and hold the two
Bloquear 3
seg.
buttons for approx. 3 seconds.
Note:
The childproof lock remains
active even after the appliance has
been switched off. In order to operate
the control panel when you turn on the
appliance, you need to deactivate the
childproof lock.
Basic settings
You can adjust certain basic settings on
the appliance. To make adjustments,
you first need to
call up the setting
mode
:
Press and hold the two
Básicos 3
seg.
buttons for approx. 3 seconds.
You can adjust the following basic
settings:
Basic setting
Description
end signal
Adjust the volume of the
audible notification signals
(e.g. at the end of a program)
or deactivate these signals
button signal
Adjust the volume of the
audible operating signals or
deactivate them
Language
Change the language of the
appliance
Содержание WTX87EH0ES
Страница 75: ...6 ...