Programme settings
en
27
Adjust drying level
+1
+2
+3
If you think the laundry is still too damp when the drying pro-
gramme has ended, you can adjust the degree of dryness to
achieve a particular dryness level. To increase the dryness level,
set the degree of dryness to b1 and +3. This will
extend the programme duration but the temperature will remain
the same.
Press a dryness level, e.g.
ö
(Iron Dry), repeatedly until the
required degree of d1, +2, +3 is shown.
Once you have adjusted the degree of dryness for a dryness
level, this setting will be retained even after the appliance has
been switched off.
ñ
(ready in)
ñ
‹
.
†
-
ƒ…
Before the programme starts
, you can use the "Ready in"
time to set the time at which you want the programme to finish.
This allows you to delay the end of the programme by up to 24
hours:
1.
Set the programme.
The programme duration will be displayed for the selected
programme, e.g.
‹‹
:
…†
(hours:minutes).
2.
Press
ñ
(ready in).
Note:
You can use the
˜
and
ª
selection buttons to alter
the setting values.
3.
Press
A
(Start/Pause).
This will activate the "Ready in" time.
Before the programme starts, the selected "Ready in" time
(e.g.
ñ
‹‰
:
…†
) is shown on the display and counts down
until the drying programme starts. The duration of the pro-
gramme will then be displayed.
Note:
The programme duration is included in the "Ready in"
time.
E.g.
‹
:
…‹
The drying time for
timed programmes
can be extended to up
to 3 hours 30 minutes in 10-minute increments.
Note:
You can use the
˜
and
ª
selection buttons to alter the
setting values.
Q
60min
(Anti-crease 60 min)
Q
120min
(Anti-crease 120 min)
Q
The drum moves the laundry at regular intervals after drying to
prevent creasing. You can activate the Anti-Crease function for
60 minutes (press
Q
60min
(Anti-crease 60 min)) or 120 min-
utes (press
Q
120min
(Anti-crease 120 min)), or you can deac-
tivate this function.
s
(Low heat)
Reduced temperature for delicate fabrics, e.g. polyacrylic or
elastane; may increase the drying time.
