Transporting the appliance
en
41
L
Transporting the
appliance
Transporting the appliance
:
Warning
Risk of injury/material damage/
damage to the appliance!
If you take hold of any of the appliance's
protruding parts (e.g. the appliance
door) in order to lift or move it, these
parts may break off and cause injury.
Do not take hold of any of the
appliance's protruding parts in order to
move the appliance.
:
Warning
Risk of injury!
■
The appliance is very heavy. Lifting it
may result in injury.
Do not lift the appliance on your
own.
Risk of injury!
■
The appliance has sharp edges on
which you could cut your hands.
Do not take hold of the appliance by
its sharp edges. Wear protective
gloves to lift it.
Prepare the appliance for
transportation as follows:
1.
Pull out the condensation container
horizontally and empty it.
2.
Push the condensation container
back into the appliance until you feel
it lock into place.
3.
Switch on the appliance.
4.
Set any programme.
5.
Press
Start/Pause
A
.
6.
Wait for 5 minutes.
The condensation water will be drained.
7.
Empty the condensation container
again.
8.
If installed, remove the drain hose
from the washbasin, siphon or floor
Caution!
Secure the drain hose to the
appliance to prevent it from slipping
out. Do not kink the drain hose.
9.
Switch off the appliance.
10.
Disconnect the appliance's mains
plug from the power supply.
The appliance is now ready to be
transported.
Caution!
Risk of material damage/damage to the
appliance
Despite draining, there will always be
some residual water in the appliance.
Any residual water may leak out and
cause material damage.
The appliance should therefore be
transported upright.
