en
Information on the display
36
Y
Information on the display
Information on the display.
--------
Note: .
If you cannot rectify the fault yourself by turning the appliance off and then on
again, please contact our after-sales service.
3
Help with the appliance
Help with the appliance.
Faults
Cause/remedy
ð
on the display and
drying has stopped.
■
Empty the condensation container and reinsert it.
Press Start/Pause
A
.
■
Once you have installed the optional drain hose*, make sure that it:
Is correctly connected
Is free of kinks
Is not blocked or clogged, e.g. with deposits
é
on the display.
Remove the fluff.
Press Start/Pause
A
.
’
on the display.
Not a fault. The heat exchanger is being cleaned automatically. Do not pull out
the condensation container while this is displayed.
The display goes out and
Start/Pause
A
flashes.
Not a fault. Energy saving mode is active .
* Depending on how the appliance is equipped or the available accessory
Faults
Cause/remedy
Appliance does not start.
■
Check the mains plug and fuse.
■
Check whether a programme has been selected.
■
Check that the appliance door is closed.
■
Check whether the childproof lock is activated. If it is, deactivate the child-
■
Check whether a "Ready in" time has been selected. If it has, this will delay
the start of a selected programme.
Creasing.
■
Load exceeded or incorrect programme selected for a type of fabric. All the
required information can be found in the programme table.
■
Remove laundry from the drum as soon as the drying programme has fin-
ished. Creasing occurs when clothing is left in the drum.
Water is leaking out.
The appliance may be positioned at an angle. Level the appliance.
Programme duration dis-
played changes as dry-
ing progresses.
Not a fault. The moisture sensor measures the residual moisture in the laundry
and adjusts the programme duration (with the exception of timed programmes).
Содержание WTW87560GB
Страница 1: ...en Installation and operating instructions Tumble dryer WTW87560GB ...
Страница 43: ...6 ...