a
a
a
a
a
ā
ʠ
ʠ
12
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service. We will
always find an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service technicians using
original spare parts. The contact details of your local after-sales service can be found in the enclosed
after-
sales service
directory.
When contacting the after-sales service, please quote the appliance's product number (E no.) and
production number (FD) (see the inside of the door).
Set the programme selector to
Aus/Arrêt
(Off) and remove the appliance plug from the socket.
ʠ
The
Start
/Stop indicator lamp
does not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The display panel light and indicator
lights
(depending on model)
go out
and the
Start
/Stop indicator light
flashes.
Energy-saving mode is activated
a
see the separate
Energy-saving mode
instructions.
ʠ
The
ā
symbol and
Start
/Stop
indicator lamp flash.
Empty container for condensation
a
see page 4
.
Clean the condensate container filter if necessary
a
Page 9
.
Each time the dryer is transported, you must wait two hours before
operating it.
ʠ
The
4
symbol and
Start
/Stop
indicator lamp flash.
Rinse the fluff filter under running water
a
Page 4.
ʠ
Dryer does not start.
Start
/Stop button selected?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out.
Make sure the dryer is level.
ʠ
The door opens by itself.
Push the door closed until you hear it click into place.
ʠ
Creasing.
Laundry load exceeded?
Remove articles of clothing immediately after the end of the
programme, hang up and pull into shape.
Unsuitable programme selected
a
Page 7.
ʠ
Laundry is not dried correctly or is still
too damp.
After the end of the programme, warm laundry feels damper than it
actually is. Spread the laundry out and allow the heat to disperse.
Finely adjust the dryness level – this extends the drying time but
does not increase the temperature. Your laundry will become drier.
Select a programme with a longer drying time or increase the
drying level. This does not increase the temperature.
Select a time programme for extended drying of laundry that is still
damp .
If you have exceeded the maximum load for the programme, the
laundry may not be dried correctly.
Clean the moisture sensor in the drum. A fine layer of limescale
may adversely affect the performance of the sensors and your
washing will not dry properly .
Drying has been interrupted as a result of a power cut, because the
condensate container is full or because the maximum drying time
has been exceeded.
ʠ
Drying time too long.
Rinse the fluff filters under running water
a
Page 4.
Insufficient supply of air
a
ensure that air can circulate.
Air inlet possibly blocked
a
Clear inlet
a
Page 8
.
Ambient temperature higher than 35 °C
a
ventilate the room.
ʠ
The humidity in the room increases
significantly.
Make sure the room is sufficiently ventilated.
ʠ
Cln
appears in the display panel.
Not an error! Automatic cleaning of the heat exchanger.
Do not empty the condensate container.
ʠ
Power failure.
Remove the laundry from the dryer immediately and spread it out.
Heat may escape. Be careful as the door, the drum and the laundry
may be hot.
ʠ
Other intermittent noises and
vibrations.
Not an error!
Normal noises
a
Page 11
.
ʠ
Loud humming noise for several
seconds.
Has the condensate container been properly reinserted?
a
Push the condensate container all the way in.
Not an error! Normal noises
a
Page 11
.
13
Safety instructions
Emergency
– Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use the
dryer...
– in rooms inside the house.
– to dry fabrics.
The dryer
must NEVER...
– be used for purposes other than those described above.
– be modified in terms of its technology or properties.
Hazards
– The dryer must not be used by children or persons who have not been instructed
in its use.
– Do not leave children unsupervised near the dryer.
– Keep pets away from the dryer.
– Remove all objects from the pockets of garments.
Pay particular attention to cigarette lighters
a
Risk of explosion
– Do not lean or sit on the door
a
Risk of tipping.
Installation
– Secure loose cables
a
Tripping hazard.
– Do not operate the dryer where there is a risk of frost.
Mains
connection
– Connect the dryer according to specifications to an AC earthed socket,
otherwise it cannot be guaranteed that the appliance is completely safe.
– The cable cross-section must be sufficient.
– Only use earth-leakage circuit breakers with the following symbol:
– The appliance plug and socket must be compatible.
– Do not use multiple plugs/connectors and/or extension cables.
– Do not touch or hold the appliance plug with wet hands
a
Risk of electric shock.
– Never pull the appliance plug out of the socket by its cable.
– Do not damage the mains lead
a
Risk of electric shock.
Operation
– Only laundry must be loaded into the drum.
Before switching on the dryer - check the contents.
– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover,
cleaning solvent, etc.)
a
Fire/explosion hazard.
– The tumble dryer is not to be used if industrial chemicals have been used for
cleaning.
– Hazard caused by dust (e.g. coal dust, flour): do not use the dryer
a
Risk of explosion!
– Do not turn off the dryer until the drying process ends, unless the laundry will be
removed quickly and spread out, so that the heat can dissipate.
– Do not put laundry containing foamed material/rubber in the dryer
a
elastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
– Light things, such as long hair, may be sucked into the air inlet of the dryer
a
Risk of injury.
– Final part of a tumble dryer cycle occurs without heat (cool down cycle), to
ensure that the items are left at a temperature that ensures that the items will not
be damaged.
– Switch off the dryer once the programme has ended.
– The water from condensation is not drinking water and may be contaminated
with fluff.
Defect
– Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
– Do not use a dryer with a faulty mains lead. To prevent risks, a faulty mains lead
must only be replaced by the after-sales service.
Spare parts
– Only use genuine spare parts and accessories for safety reasons.
Disposal
– Dryer: unplug the appliance plug,
then
cut the mains lead from the appliance.
Dispose of the dryer at an approved public disposal facility.
– The dryer's heat exchanger contains fluorinated greenhouse (R134a) gas
in a hermetically sealed unit
a
dispose of in a proper manner.
Capacity: 0.22 kg.
– Packaging: keep all packaging out of reach of babies and children.
a
Danger of suffocation!
– All materials are environmentally safe and recyclable.
Dispose of in an environmentally-responsible manner.
Содержание WTW86F94CH
Страница 10: ...en operating instructions Dryer WTW86F94CH ...