Installation and connection
en
13
:
Warning
Risk of fire/risk of poisoning/risk of
material damage and damage to
the appliance!
The dryer contains refrigerant which,
although it is environmentally friendly, is
flammable R407c.
■
Make sure that the air inlet on the
dryer is always kept clear and that
the room has sufficient ventilation.
■
In the event of a leak, any escaping
refrigerant could lead to poisoning
and create a combustible air/gas
mixture if the room is too small.
Only operate this appliance in rooms
which are sufficiently large. The
room must have a capacity of 1 m³
per 8 g of refrigerant. The amount of
refrigerant in your appliance can be
found on the back of the appliance.
■
Do not place the dryer near open
fires and ignition sources.
Caution!
Risk of injury
■
As the dryer is heavy, you could
injure yourself by trying to lift it.
Do not lift the dryer on your own.
■
You could cut your hands on the
sharp edges of the dryer. Do not
hold the dryer by the sharp edges.
■
Protruding parts on the dryer may
break off when it is lifted or pushed.
Do not move the dryer by holding
onto protruding parts.
Caution!
Risk of material damage to the dryer or
fabrics
■
Check the dryer for damage caused
during transportation. Never operate
a dryer if it is damaged.
■
Any residual water in the dryer may
freeze and damage the dryer. Do not
install the dryer in rooms that are at
risk of frost.
During installation, ensure that:
■
The dryer is placed on a clean, level
and firm surface,
■
The mains plug can be accessed at
all times,
■
The area around the dryer is kept
clean and
■
The dryer is levelled using the
threaded feet.
Note:
Check the alignment of the
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
Note:
If in doubt, have the appliance
connected by a specialist.
