Operating the appliance
en
27
Changing the programme or
adding laundry
You can remove or add laundry and
change or alter the programme at any
time during drying.
1.
To pause the programme, open the
dryer door or press the Start button.
2.
Add or remove laundry.
3.
Select another programme or an
additional function, if required.
4.
Close the dryer door.
5.
Press the Start button.
Note:
The programme duration in the
display panel is updated depending on
the load and residual moisture in the
laundry. The values displayed may
change after the programme is
changed or the load is adapted.
Cancelling the programme
The programme can be interrupted at
any time; to pause, open the dryer door
or press the Start button.
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, you must
remove the laundry items and spread
them out so that the heat can disperse.
Programme end
“Ÿš
appears in the display panel.
Removing laundry and
switching off the dryer
1.
Remove the laundry.
2.
Turn the programme selector to the
"off" position.
Emptying the condensate
container
By default, the condensation from the
appliance runs into the condensation
container.
Alternatively, you have the option of
discharging the condensation water
*
supplied depending on the model. If you
choose to discharge the condensation
water into the waste-water system, you
will not need to empty the condensation
container during the drying programme
or after each time you use the dryer.
1.
Pull out the condensate container
horizontally.
* into the waste-water system via a
drain hose
