en
operation
26
12.5 Starting the programme
Requirement:
A programme is set.
"Setting a programme", Page 25
▶
Press
.
a
The display shows the programme
duration or the "Ready in" time.
a
After the programme has ended,
the display shows: "End" .
Note:
If "Hot" appears, the appli-
ance cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
12.6 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡
The programme is set.
→
"Setting a programme", Page 25
¡
The "Ready in" time is set and ac-
tivated.
→
1.
Press
.
The activated "Ready in" time is
paused.
2.
Press repeatedly until the dis-
play indicates the desired "Ready
in" time.
3.
Press
.
The changed "Ready in" time is ac-
tivated.
12.7 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Requirement:
A programme has
started.
→
1.
Press
.
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press
.
12.8 Cancelling the pro-
gramme
1.
Press
.
2.
Open the appliance door.
3.
Remove the laundry.
→
12.9 Unloading the laundry
1.
Open the door.
2.
Remove the laundry from the
drum.
12.10 Switching off the appli-
ance
▶
Turn the programme selector to
Off
.
12.11 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Содержание WTH85V6PSN
Страница 36: ...en Cleaning and servicing 36 2 Clean the moisture sensor with a sponge ...
Страница 45: ......
Страница 46: ......
Страница 47: ......