en
operation
30
8.
Close the fluff filter.
9.
Insert the fluff filter.
10.
Close the door.
12.11 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Note:
Operate this appliance using
the water drain hose provided. If you
connect the water drain hose
→
larly empty the condensation con-
tainer →
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡
The display shows the following
after drying: "End"
¡
or during operation: .
1.
Pull out the condensation con-
tainer, keeping it level.
2.
Empty the condensation container.
Make sure that you insert the con-
densation container before operat-
ing the appliance.
→
