c
@c
c
L
I
|
c
c
÷
@
c
+
@
+
@
L
a
+c
+
|
c
a
a
a
9
Technical data
ʠ
Dimensions (DxWxH)
60 x 60 x 85 cm
Weight
approximately 35 kg
Max. capacity
7 kg
Condensate container
approx. 4.2 l
Ambient temperature
5 - 35 °C
Connection voltage
220 - 240 V
Connected load
2025 / 2600 W
Fuse protection
13 A
Product number
a
Rating plate or inside of the door
Production number
You can find the rating plate on the back of the dryer.
ʠ
Consumption rates
Specifications are average values established under normal
operating conditions. Fluctuations of up to 10 % are possible.
Spin speed in rpm
(residual moisture)
Drying time** in
min incl. 8 min
cooling time
Energy
consumption**
in kWh
L
Cottons 7 kg
13 A
13 A
+
Cupboard / Cupboard Dry *
1400
(approx. 50 %)
90
3.32
1000
(approx. 60 %)
106
3.92
800
(approx. 70 %)
120
4.48
|
c
Iron Dry *
1400
(approx. 50 %)
66
2.45
1000
(approx. 60 %)
82
2.94
800
(approx. 70 %)
96
3.43
I
Synthetics 3.5 kg
+
Cupboard / Cupboard Dry *
800
(approx. 40 %)
40
1.16
600
(approx. 50 %)
45
1.45
*Test programmes according to DIN EN 61121.
**The values may diverge from those specified depending on over and
undervoltage, fabric type, composition of the laundry to be dried, residual moisture
in the fabric and the amount of the load.
Optional accessories
(order from the after-sales service using the order number, depending on model)
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. The dryer
must be
fastened on the washing machine with this connection set.
If the worktop of the washing machine is less than 544 mm deep, please consult
the after-sales service or your specialist retailer.
WTZ
11311
10
What to do if ...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales
service. We will always find an appropriate solution and will avoid unnecessary visits by
engineers. Trust the expertise of the manufacturer and rest assured that the repair will be
carried out by trained service technicians using original spare parts. The contact details of
your local after-sales service can be found in the enclosed
after-sales service
directory, or
by calling one of these numbers:
–
GB
0344 892 8979 (Calls charged at local or mobile rate.)
–
IE
01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to
Off
and remove the appliance plug from the socket.
ʠ
Ĕ÷
Start/
Stop indicator lamp
does not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
Container empty
/
Clean
.
/
Ä
indicator lights up.
Empty container for condensation
a
see page 4
.
ʠ
Container empty
/
Clean
.
/
Ä
indicator light
flashes.
Clean the fluff filter under running water
a
see page 4.
Clean the air cooler, if required
a
see page 6.
ʠ
Dryer does not start.
Has the
Ĕ
Start/
Stop button been pressed?
Door closed?
Programme set?
ʠ
Programme terminated shortly
after the start.
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out.
Make sure the dryer is level.
ʠ
The door opens by itself.
Push the door closed until you hear it engage.
ʠ
The required degree of dryness
was not achieved or the drying
time was too long.
Clean the fluff filter under running water
a
see page 4.
Empty the container for condensation.
Ambient temperature higher than 35 °C
a
ventilate the
room.
Air inlet may be blocked
a
clear obstruction.
Unsuitable programme selected?
a
see page 7.
Dryer installed too closely to other objects? Provide
adequate air circulation.
Mains failure
a
Restart the dryer.
Fine layer of limescale on the moisture sensors. Clean
the sensors
a
see page 6
.
ʠ
Laundry damp.
Use the next drying programme up or use the timed
programme as a supplement
a
see page 7.
Warm laundry feels damper than it really is!
ʠ
The humidity in the room has
increased significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked?
a
Clear obstruction.
Make sure that the air cooler is inserted.
ʠ
One or more indicator lights
are flashing.
Clean the fluff filter and air cooler
a
see page 4/6
.
Check the installation conditions
a
see page 8.
Switch off, allow to cool, switch back on and restart the
programme.
ʠ
Power failure.
Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate. Be careful as the door,
the drum and the laundry may be hot.
a
a
a
a
a
a
a
a
a
a
a