c
@
c
c
c
c
ø
@
c
è*
*
è*
è*
è*
è*
è*
è*
cc
cc
cc
cc
c@
è*
è*
è*
è*
è*
cc
cc
cc
cc
c@
*
è*
è*
è*
è*
è*
c
c
ø
@
c
è*
è*
è*
è*
è*
è*
cc
cc
cc
cc
c@
è*
è*
*
a
a
a
Take all accessory parts out
Do not operate the dryer if there
9
Technical data
Dimensions (DxWxH)
60 x 60 x 85 cm
Weight
approximately 35 kg
Max. capacity
7 kg
Condensation container
approx. 4.2 l
Ambient temperature
5 - 35 °C
Connection voltage
220 - 240 V
Connected load
2025 / 2600 W
Fuse protection
10 / 16 A
Product number
a
Rating plate or inside of the door
Production number
You can find the rating plate on the back of the dryer.
ʠ
Consumption rates
These are guide values determined under standard
conditions. Deviations of up to 10 % are possible. The value
on the label is achieved at the maximum heat setting.
Spin speed in rpm
(residual moisture)
Drying time** in
minutes, includ-
ing 8 minutes
cool cycle
Energy
consumption**
in kWh
Resistentes/Algod.
(Cottons)
7 kg
10 A
16 A
10 A
16 A
Seco para guardar
(Cupboard Dry)*
1400 (aprox. 50%)
98
90
3.32
3.32
1000 (aprox. 60%)
117
106
3.92
3.92
800
(aprox. 70%)
138
120
4.48
4.48
1400 (aprox. 50%)
76
66
2.45
2.45
Seco
(Iron Dry) *
1000 (aprox. 60%)
91
82
2.94
2.94
800
(aprox. 70%)
106
96
3.43
3.43
Sintéticos (Easy-Care)
c
3.5 kg
800
(aprox. 40%)
42
40
1.16
1.16
Seco para guardar
(Cupboard Dry)*
600
(aprox. 50%)
53
45
1.45
1.45
*Test program to DIN EN 61121.
**The values may deviate from the values shown here, because of over/undervoltage, type
of fabric, composition of the laundry to be dried, residual moisture in the material and size of
the load.
Optional accessories
(order from the after-sales service using the order number)
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. This connection set must always be used to secure the dryer to the washing
machine. If the worktop of the washing machine is less than 544 mm deep, please consult
the after-sales service or your specialist retailer.
Platform
For easier loading and unloading. The basket in the pull-out can be used for carrying the
laundry.
Installation underneath the worktop
Risk of electric shock.
Instead of the appliance covering plate, you
must
have a metal cover fitted by an expert.
WTZ
11311
WMZ
20460
WTZ
10295
10
What to do if ...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed
after-sales service
directory, or by calling one of these numbers:
–
GB
0844 8928979 (Calla from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
–
IE
01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to
Stop
(
Off) and remove the appliance plug from the socket.
ʠ
The
Inicio
/Stop (
Start
/Stop)
indicator light does not come on.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The
Depósito/Limp.
o
/
p
(Container/Clean) indicator light
comes on.
Empty the condensation container
a
page 4
.
ʠ
The
Depósito/Limp.
o
/
p
(Container/Clean) indicator light is
flashing.
Clean the fluff filter
a
page 4.
Clean the air cooler if necessary
a
page 6.
ʠ
Dryer does not start.
Has the
Inicio
/Stop (
Start
/Stop) button been pressed?
Door closed?
Programme set?
ʠ
Programme stops shortly after it
has started.
Ambient temperature greater than 5 °C?
ʠ
Water is leaking out.
Make sure the dryer is level.
ʠ
The door opens by itself.
Push the door closed until you hear it engage.
ʠ
The required degree of dryness
was not achieved or the drying
time was too long.
Clean the fluff filter
a
page 4.
Empty the condensation container.
Ambient temperature higher than 35 °C
a
airing.
Air inlet may be blocked
a
keep unobstructed.
Was an unsuitable programme selected?
a
page 7.
Has the dryer been installed with sufficient space on all
sides? Ensure that air can circulate.
Mains failure
a
Restart the dryer.
Thin layer of limescale on the moisture sensors. Clean the
moisture sensors
a
page 6
.
ʠ
Laundry damp.
Use the next drying programme up or use the timer
programme as a supplement
a
page 7.
Warm laundry feels damper than it really is!
ʠ
The humidity in the room
has increased significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked?
a
keep unobstructed.
Ensure that the air cooler is in use.
ʠ
One or more indicator lights is/are
flashing.
Clean the air fluff filter and air cooler if necessary
a
page 4/6
.
Check the installation conditions
a
page 8.
Switch off, allow to cool, switch on again and restart the
programme.
ʠ
Mains failure.
Remove laundry from the dryer immediately and spread
out. This allows the heat to dissipate.
a
a
a
a
a
a
a
a
a
