Bosch WTA74200AU, Инструкция по эксплуатации, Страница: 8 / 10

a
a
a
a
10
Optional accessories
(order from the after-sales service using the order number, according to model)
Exhaust air duct set
The exhaust air is extracted via a hose.
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. The dryer
must be fastened to the washing machine using this connection set.
If the worktop of the washing machine is less than 544 mm deep, please consult the
after-sales service or your specialist retailer.
Platform
For easier loading and unloading. The basket contained in the drawer can be used
to carry the laundry.
Technical data
Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)
Weight approx. 36 kg
Max. capacity 7 kg
Connection voltage 220-240 V
Connected load 2200 W
Fuse protection 10 A
Ambient temperature 5 - 35°C
Product number
Production number
Inside of door
The rating plate can be found on the back of the dryer.
WTZ
1130
WTZ
11311
WMZ
20500
Consumption rates
Fabrics/programmes
Residual moisture in the fabrics
after spinning
Drying time**
Energy
consumption**
L
Cottons 7 kg
+
. Cupboard Dry* 1400 rpm (50%) 107 min 3.16 kWh
1000 rpm (60%) 128 min 3.95 kWh
800 rpm (70%) 149 min 4.60 kWh
|
Iron Dry* 1400 rpm (50%) 83 min 1.96 kWh
1000 rpm (60%) 99 min 2.92 kWh
800 rpm (70%) 116 min 3.63 kWh
I
Synthetics 3.5 kg
+ . Cupboard Dry* 800 rpm (40%) 47 min 1.32 kWh
600 rpm (50%) 59 min 1.72 kWh
* Programme setting for testing in accordance with applicable standard DIN EN61121.
** The values may differ from those specified, depending on the type of fabric, composition of
laundry to be dried, residual moisture in the fabric and the amount of laundry being loaded.
11
What to do if ...
Turn the programme selector to Off and remove the mains plug from the socket.
ʠ The $ Start/Pause indicator light
does not light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ The display panel light and
indicator lights
(depending on
model) go out and the
$ Start/Pause indicator light
flashes.
Energy-saving mode is activated
a
see the separate
Energy-saving mode instructions.
ʠ The display panel switches off. The appliance goes into the sleep mode after activating
Finished in option a page 5 .
ʠ
p
(Fluff filter/Exhaust air duct)
indicator light flashes.
Clean the fluff filter a page 4.
Press the $ Start/Pause button to reset the displayed
indication and then press the $ Start/Pause button
again to restart the appliance if necessary.
Exhaust air duct blocked or bent?
Clean the exhaust air duct
a
page 8.
If necessary, clean the insect screen on the exhaust air
pipe.
ʠ Dryer does not start. $ Start/Pause button selected? Door closed?
Programme set?
ʠ Programme terminates shortly
after starting. Ambient temperature greater than 5°C?
Is the appliance loaded with the laundry?
Load too small for selected programme?/Use timed
programme
a
page 6/7.
Loaded laundry dry?
ʠ Water is leaking out. Make sure the dryer is level.
After-sales service
If you cannot rectify the fault yourself (e.g. switching off/on) a What to do if..., page 11/12 ,
please contact our after-sales service. We will always find an appropriate solution and avoid
unnecessary visits by engineers.
The contact details of your local after-sales service can be found in the enclosed after-sales
service directory.
–
GB 0344 892 8979 (Calls charged at local or mobile rate.)
– IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)
Please provide the after-sales service the product number (E no.) and the production number
(FD) of the appliance.
Product number Production number
You can find this information:
inside the door* / in the opened service flap*
and on the rear of the appliance.
*depending on the model
Trust the expertise of the manufacturer. Contact us for assistance. In this way, you can rest
assured that the repair will be carried out by trained service technicians using original spare
parts.
ʠ
ʠ
a
y
a
a a
ʠ
a
a
a
ʠ
a
ʠ
a
a
a
ʠ
ʠ
a
a
a
a
a
a
a
a
a
a