The Ministry in essence NL
12.3 Filling the drum with
laundry
3.
Reload or remove the laundry.
4.
Close the appliance door.
5.
Press Start/Refill.
Remark: To avoid creasing, keep the
maximum load of the
12.6 Program Cancel
1.
on Start/Reload to press.
Required: The laundry is prepared.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry with a rotating drum.
If you want to avoid or abort the
cooling process, open the door.
1.
Open the door.
Make sure the drum is empty.
2.
Place the laundry in the drum.
2.
Open the appliance door.
3.
3.
Close the door.
Make sure that no small items of
laundry are caught in the door.
12.7 Remove laundry
1.
Open the appliance door.
2.
Remove the laundry.
12.4 Starting the program
12.8 Switching off the device
Remark: If you want to change the
time until the program end, first set
the ready in time.
▶
Turn the program selector on from to make.
12.9 Fluff filter
▶
on Start/Reload to press.
a The display shows whether the program
maduur or the ready in time
displayed.
a After the program end, it shows
display: "End".
During drying, the fluff from the
laundry is collected in the fluff filter.
The fluff filter protects the device
against fluff.
Cleaning the fluff filter
12.5 Adding laundry
When the drying program has finished
or if the display shows a message
during use, clean the fluff filter.
You can always remove or add the
laundry after the program has started.
1.
on Start/Reload to press.
Remark: If you do not clean the
device as described, the device
function may be impaired.
The cooling process starts automatically
after approx. 30 seconds and cools the
laundry with a rotating drum.
If you want to avoid or abort the
cooling process, open the door.
Requirements
sex The display shows after drying:
"end"
sex or during use: .
1.
Open the door.
2.
Open the appliance door.
31
