en
Appliance care
36
15.3 Starting the appliance
care programme
Requirements
¡
The appliance is ready to run the
appliance care programme.
→
"Preparing the appliance for the
appliance care programme ",
Page 34
¡
The condensation container is
ready for the appliance care pro-
gramme.
→
container for the appliance care
programme", Page 35
.
1.
Set the programme to position 1.
2.
Press and hold
Για σιδέρωμα
.
3.
Set the programme to position 4.
a
"CP1" and the programme duration
alternate on the display.
15.4 Running the basic appli-
ance care programme on
the appliance
To remove any light soiling, you can
run a basic appliance care pro-
gramme.
Note:
After a certain period of use,
the appliance automatically recom-
mends that you run the basic appli-
ance care programme. Before the
start and end of the programme, the
display shows the note "CrE" for 5
seconds. The note is shown re-
peatedly until the basic appliance
care programme has been run com-
pletely.
Requirements
¡
The appliance is ready to run the
appliance care programme.
→
"Preparing the appliance for the
appliance care programme ",
Page 34
.
¡
The appliance care programme
has started.
→
"Starting the appliance care pro-
1.
Add approx. 1 ½ litres of hot tap
water into the condensation con-
tainer.
Hold the full condensation con-
tainer level so that no liquid spills
out.
2.
Insert the condensation container
so that it locks into place.
3.
Press
Έναρξη/Προσθήκη ρούχων
.
Содержание WQG24509GR
Страница 55: ......