Bosch WQG23508GR, Руководство пользователя и инструкции по установке, Страница: 31 / 52

operation
en
31
12.10 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡
The display shows the following
after drying: "End"
¡
or during operation: .
1.
Pull out the condensation con-
tainer, keeping it level.
2.
Empty the condensation container.
Check the condensation container
filter →
Page 41 regularly and
clean the filter if it is dirty.
Make sure that you insert the con-
densation container before operat-
ing the appliance.
→
"Inserting the condensation con-
tainer", Page 31
Inserting the condensation
container
Requirement:
The condensation con-
tainer → Page 31 is removed from
the appliance.
▶
Push the condensation container
in as far as it will go.