Bosch WOE802D0IN Скачать руководство пользователя страница 6

Страница: 6 / 36

Installing and connecting the appliance

Connecting the appliance

Caution!
Risk of material damage/damage to the

appliance

■

If the water pressure is too high or

too low, the appliance may not be

able to operate properly, and this

may also result in material damage

or damage to the appliance.

Ensure that the water pressure in the

water supply facility is at least 30

kPa (0.3 bar), and does not exceed

800 kPa (8 bar).

Material damage/damage to the appliance

■

If the water hoses are altered or

damaged, this may result in material

damage or damage to the

appliance.

The water hoses must not be kinked,

crushed, altered or severed.

Material damage/damage to the appliance

■

The use of hoses supplied by other

brands to connect to the water

supply may result in material

damage or damage to the

appliance.

Use the hoses supplied with the

appliance or genuine spare part

hoses only.

Notes

■

In addition to the information listed

here, the local water and electricity

supplier may have special

requirements.

■

If in doubt, have your appliance

connected by a professional.

Water supply hose

Notes

■

When using a spanner, use the

correct size and apply controlled

force.

■

Only operate the appliance using

mains water.

Connection to the universal tap

adapter

Note:

When connecting to a threadless

tap, fit the supplied adapter first.

Slide the sliding sleeve downwards

from the snap connector (all balls

must be exposed) and then

disconnect the snap connector from

the connection socket.

Turn part B of the connection socket

until the clearance between part A

and part B is at least 5 mm.

Unscrew all of the screws from part

Slide the connection socket over the

tap opening and then screw the

screws tightly back into part A.

(

Connection socket

Exposed balls

Snap connector

âPP

Содержание WOE802D0IN





































Результаты поиска

Содержание WOE802D0IN

Отзывы:

Бренды по названию

Популярные бренды

Bosch WOE802D0IN, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WOE802D0IN

Отзывы:

Бренды по названию

Популярные бренды