Bosch WNA254XSKE, Руководство пользователя и инструкции по установке

Страница: 32 / 52

en
Basic operation
32
14.8 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
1.
Press
Start/ Reload
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: End.
2.
If is selected, the laundry is not
spun and the water is drained after
rinsing.
Notes
¡
If the laundry is not removed, the
Anti-Crease programme starts after
15 minutes. The programme takes
around 30 minutes. The display
shows 0
：
00, ⁠ ⁠ , and End al-
ternately and appears.
Press any button to stop the Anti-
Crease programme and to remove
the laundry.
¡
If appears, the appliance cools the
laundry.
When goes out, the laundry has
cooled down.
14.9 Adding laundry
1.
Press
Start/ Reload
.
During the washing cycle, the ap-
pliance pauses.
During the drying cycle, the appli-
ance checks whether it is possible
to add laundry.
Note:
If appears, it is not pos-
sible to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press
Start/ Reload
.
14.10 Cancelling the pro-
gramme
1.
Press
Start/ Reload
.
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse
programme.
– If the water level is high, start
the
Spin
programme or select a
suitable programme for draining.
→
"Programmes", Page 26
3.
Remove the laundry → Page 32 .
14.11 Cancelling the drying
programme
14.12 Unloading the laundry
1.
Open the appliance door.
2.
Remove the laundry.
14.13 Switching off the appli-
ance
1.
Turn the programme selector to .