en
Operating the appliance
40
Starting the programme
Touch and hold
A
Start/Reload
button for 1~2 seconds, then release
the button. The programme starts and
the appliance door is locked.
The finish-in time is shown in the display
panel and counts down until the
programme starts. After the programme
has started, the programme duration is
displayed. And the symbols for the
programme progress are lighting up.
Childproof lock
You can lock the appliance to prevent
the settings you have set from being
changed inadvertently. To do this,
activate the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the
G
SpeedPerfect
and
ñ
Ready in/Time Dry
buttons for 3
seconds. The symbol
E
lights up in the
display panel.
■
E
lights up: The childproof lock is
activated.
■
E
flashes: If the programme and
programme settings are adjusted
while childproof lock is activated.
Note:
When the programme ends,
“Ÿš
is displayed. The door is unlocked.
E
symbol remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the
G
SpeedPerfect
and
ñ
Ready in/Time Dry
buttons until
the symbol
E
disappears.
Adding/removing laundry
After starting the programme (only for
washing), you can add or remove
laundry if necessary.
Touch the
A
Start/Reload
button. The
appliance checks whether reloading is
possible.
If the following appears on the display
panel:
■
The symbol
Õ
disappears,
reloading is possible.
■
The symbol
Õ
lights up, reloading is
not possible.
To continue the programme, touch the
A
Start/Reload
button. The
programme continues automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Touch the
A
Start/Reload
button.
2.
Select another programme.
3.
And touch the
A
Start/Reload
button again. The new programme
starts from the beginning.
Note:
If drying is activated, after
touching the
A
Start/Reload
button,
when the
•©£
is displayed, waiting for
the appliance running to cool down the
laundry till the
•©£
disappears, then
select another programme.