en
Home Connect
52
4.
Press the Start button.
©Ÿ
will appear on the display panel
(switched on).The appliance's Wi-Fi
function is now switched on.
©””
will appear on the display panel
(switched off). The appliance's Wi-Fi
function is now switched off.
5.
You can exit the Home Connect
settings by pressing the
Remote
Start
}
button.
Note:
If
©Ÿ
(switched on) appears on
the display but you actually wanted to
select
©””
(switched off), you will need
to repeat all of these steps again.
Note:
If Wi-Fi is not activated on your
appliance, you will not be able to
connect it to your home network or to
the app.
Resetting your network
settings
You can clear the network settings and
break the connection to your
smartphone or tablet PC by resetting
the network settings.
1.
Switch the appliance on.
2.
Press and hold the
Remote Start
}
button for more than 3 seconds.
‘ž£
(connect automatically) will
appear on the display panel.
3.
Turn the programme selector to
position 5.
§“†
(reset network
settings) will appear on the display
panel.
4.
Press the Start button.
5.
¢“†
(yes) will appear on the display
panel.
6.
Press the Start button to confirm.
“Ÿš
(end) will appear on the display
panel. The network settings have now
been reset. Your appliance is no longer
connected to your home network or the
Home Connect app.
7.
You can exit the Home Connect
settings by pressing the
Remote
Start
}
button.
Notes
■
If the network settings could not be
reset,
“§§
(fault) will appear on the
display panel.
■
If you want to operate the appliance
via the Home Connect app again,
you will need to reconnect it to your
home network and to the
Home Connect app either
automatically or manually.
Updating the software
You can update the Home Connect
software on your appliance.Whenever a
new update is available,
—˜š
(update)
will appear on the display panel.
You can install the update directly via
the message on the display panel or via
the appliance settings.
1.
Switch the appliance on.
2.
Press and hold the
Remote start
}
button for more than 3 seconds.
‘ž£
(connect automatically) will
appear on the display panel.