Bosch WLG24260BY, Инструкция по эксплуатации и руководство по установке

Страница: 34 / 52

34
Intense noise, vibra-
tions and “wander-
ing” during spinning.
– Appliance aligned?
Level the appliance.
~
Page 45
– Appliance feet fixed?
Secure appliance feet.
~
Page 45
– Transportation protection devices removed?
Remove transportation bolts.
~
Page 40
The colon on the
Ready in
display
:
stops flashing.
Mains voltage too low
~
Page 27
The single dot (
.
)
flashes.
Undervoltage during the washing programme causes an extending
of the wash programme.
~
Page 27
Display panel/indi-
cator lights do not
function while the
appliance is running.
– Power failure?
– Fuse tripped? Switch on/replace the circuit breakers.
– If the fault occurs repeatedly, call the after-sales service.
~
Page 35
Detergent residue
on the laundry.
– Occasionally, phosphate-free detergents contain water-insoluble
residue.
– Select
O Rinse
or brush the laundry after washing.
¯‹ appears in the
display panel in re-
load mode.
– Water level too high. Not possible to add laundry. Close the
washing machine door immediately, if necessary.
– To continue the programme, select the A
Start
/Reload button.
I
+
¯‹ and the A
Start/Reload
button
are flashing in the
display panel in re-
load mode.
Not possible to add laundry. Wait until I
+
¢ “ † are lit
(approx. 1 min).
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
– Switch off the appliance and pull out the mains plug.
– Turn off the water tap and call the after-sales service.
~
Page 35
Faults Cause/Remedy