en
operation
32
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.8 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press .
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: .
13.9 Soaking laundry
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press .
3.
To resume the programme, after
the desired soaking time, press .
13.10 Adding laundry
1.
Press .
The appliance pauses.
Note:
If appears, it is not possible
to add laundry.
When goes out, it is possible to
add laundry.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press .
13.11 Cancelling the pro-
gramme
1.
Press .
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the programme.
– If the water level is high, start
the programme or select a suit-
able programme for draining.
→
3.
13.12 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1.
Start the programme or select a
suitable programme for draining.
→
2.
Press .
13.13 Unloading the laundry
1.
Open the appliance door.
2.
Remove the laundry.
13.14 Switching off the appli-
ance
1.
Turn the programme selector to .
2.
Turn off the tap.