Additional programme settings
en
31
\
Additional programme
settings
Additional programme settings
Note:
You can find possible additional
programme settings in the overview;
these differ depending on the model.
By selecting additional programme
settings, you can better adapt the
washing process to your items of
laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not retained after the
appliance is switched off.
T
Prewash
For heavily soiled laundry.
Notes
■
If
intelligent dosage is selected
, the
detergent will be dispensed
automatically for the prewash and
the main wash.
■
If
dosing manually
, allocate
detergent to the prewash and the
main wash. Place detergent for the
prewash in the drum and add
washing powder for the main wash
to the manual dosing compartment.
Ï
Rinse Plus
Settings that can be selected:
Additional rinse cycles for particularly
sensitive skin and/or for areas with very
soft water.
Longer programme duration, due to
additional rinse cycle.
The number of rinse cycles that the
programme actually runs depends on
the number that is set as a basic setting
for the programme.
p
Easy Iron
A special operation using reduced spin
speed followed by fluffing to help
reduce creasing.
Touch
p
Easy Iron
to activate or
deactivate it.
Note:
If
p
Easy Iron
has been
activated, the laundry will have retained
a higher than average level of moisture
after spinning.
G
SpeedPerfect
Washing in a shorter time while
achieving a washing result that is
consistent with the normal performance.
Touch
G
SpeedPerfect
to activate or
deactivate it.
Note:
With the
G
SpeedPerfect
additional programme setting activated,
the maximum load of washing will be
reduced.
Ž
i-DOS setting
Your appliance has an intelligent dosing
system for liquid detergent (
w
) and
fabric softener (
©
).
The optimum quantities of liquid
detergent and fabric softener are
dispensed automatically.
You can press
Ž
i-DOS to activate or
deactivate automatic dosing and set the
basic dosages.
+1
+ 1 rinse cycle
+2
+ 2 rinse cycles
+3
+ 3 rinse cycles