Installation and connection
en-us
15
4.7 Aligning the appliance
In order to reduce noise and vibrations, and to prevent the
appliance from moving, align the appliance correctly.
1.
Loosen the lock nuts using a WAF 17 wrench by turning
it in a clockwise direction.
2.
To align the appliance, turn the appliance feet. Check
that the appliance is level using a spirit level.
All appliance feet must stand firmly on the ground.
3.
Screw the lock nuts tightly against the housing using a
WAF 17 wrench.
In doing so, hold the appliance foot tight and do not ad-
just its height.
4.8 Connecting the appliance to the electric-
ity supply
Note:
Your electrical domestic installation for this appli-
ance must comply with the local legal provisions and
safety regulations, and should include a residual current
circuit breaker.
1.
Insert the power plug of the appliance's power cord in a
socket outlet nearby.
The connection details of the appliance can be found
under Technical data.
2.
Check the power plug is inserted properly.
