English |
31
Bosch Power Tools
2 609 005 792 | (25.10.11)
Operation
Starting Operation
Reversing the Rotational Direction
The rotational direction switch
9
is used to reverse the rotational direction
of the machine. However, this is not possible with the On/Off switch
8
ac-
tuated.
Right rotation:
For driving in screws, push the rotational direction switch
9
left to the stop.
The indicator for right rotation
4
lights up when the On/Off
switch
8
is actuated and the motor is running.
Left Rotation:
For loosening or unscrewing screws, push the rotational
direction switch
9
right to the stop.
The indicator for left rotation
6
lights up when the On/Off switch
8
is actuated and the motor is running.
Switching On and Off
To
start
the machine, press the On/Off switch
8
and keep it pressed.
The power light
10
lights up when the On/Off switch
8
is slightly or com-
pletely pressed, and allows the work area to be illuminated when lighting
conditions are insufficient.
To switch off the machine,
release
the On/Off switch
8
.
Fully automatic spindle locking (Auto-lock)
The drill spindle is locked when the On/Off switch
8
is not pressed.
This enables screws to be screwed in, even when the battery is empty and
allows for the machine to be used as a screwdriver.
f
When the drilling spindle is locked, do not press the On/Off switch
8 for more than 15 seconds. Otherwise the power tool can be dam-
aged.
Working Advice
f
Apply the power tool to the screw only when it is switched off.
Ro-
tating tool inserts can slip off.
Up to 13 screwdriver bits can be stored on the side of the battery charger
12
. The fixture that holds the screwdriver bits can be removed.
OBJ_BUCH-826-006.book Page 31 Tuesday, October 25, 2011 2:37 PM
