TO LEARN FOBS
- Press the Learn/Delete switch once. Note
that the LED will flash rapidly. Now press the button on the
FIRST fob to be learned corresponding to the relay functions
required (see below). The LED will come on solid whilst
receiving the transmission and then flash once to confirm
learning. Repeat for additional fobs (maximum 21). It is not
important which button is pressed on fobs learned after the
FIRST as the relay functions are set by the FIRST learned
fob.
Relay Programming
Button 1 = Both outputs momentary
Button 2 = Output 1 toggling, Output 2 momentary
Button 3 = Output 2 toggling, Output 1 momentary
Button 4 = Both outputs toggling
6. Press the Learn/Delete button once when finished learning
fobs. Note that if no RF activity occurs the WE800EV2 will
leave learn mode automatically after 20 seconds.
7. Now follow the Solution
TM
panel “Learning RF fobs”
instructions.
1. Master Code “1” Away.
2. User Number 9 - 16 Away.
3. Press a button on the fob
4. Repeat steps 1 to 3 for additional fobs.
8. Test Operation.
Note: The button functions are fixed and cannot be
changed as per the diagram below. The receiver will not
respond to rapid attempts to ARM/DISARM. Please wait 2
seconds between arm/disarm attempts.
Panic Function.
The keyfob can generate a panic alarm. Holding down
buttons 1 and 2 at the same time for 2 secs will cause a
panic alarm.
Technical Specifications
Receiver
Operating Voltage:
9 - 15 VDC
Current Consumption: 7mA Standby
45mA Both relays operating
Relay Rating:
SPDT 1Amp maximum carry @
12VDC
Reverse Polarity
Protection:
No
Operating Frequency:
433.92mHz
Receiver Type:
Superheterodyne AM ASK
Bandwidth:
250khz
Antenna:
170mm formed piano wire
Fob Storage:
EEPROM Maximum 21 fobs
Transmitter (Fob)
Operating Voltage:
12VDC Battery 27A
Operating Frequency:
433.92mHz
Bandwidth:
380khz
Tuning:
SAW resonator locked
Channels:
4
Weight:
35g including battery
Visual Indicator:
Blue LED
Ordering Information
SKU
Description
321070
WE800EV2KIT 433mHz Receiver with
2 x 4 Button Fobs
2 WE800EV2 RF Arming Kit
AWAY Arm / Disarm
STAY Arm / Disarm
Output 1 Relay
Output 2 Relay
