operation
en
37
2.
To pause the programme, after ap-
prox. 10 minutes, press
.
3.
To resume the programme, after
the desired soaking time, press
.
13.9 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Requirement:
A programme has
started.
→
"Starting the programme", Page 36
1.
Press
.
The appliance pauses.
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press
.
13.10 Cancelling the pro-
gramme
1.
Press
.
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse/Freshen Up
pro-
gramme.
– If the water level is high, start
the
Spin
programme or select a
suitable programme for draining.
→
3.
Remove the laundry.
→
13.11 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
Requirements
¡
Rinse Stop is activated.
→
¡
The last rinse cycle of the set pro-
gramme has ended and the laun-
dry is in the rinsing water.
1.
Set the
Spin
programme or a pro-
gramme for draining the water.
→
2.
Press
.
13.12 Unloading the laundry
1.
Open the door.
2.
Remove the laundry from the
drum.
13.13 Switching off the appli-
ance
1.
Press .
2.
Wipe the rubber gasket dry and re-
move any foreign objects.
3.
Leave the appliance door and de-
tergent drawer open so that resid-
ual water can evaporate.