Bosch WAX32K50NL, Руководство пользователя и инструкции по установке

Страница: 50 / 64

NLTroubleshooting
Malfunction
Cause and Troubleshooting
Washing water is not
pumped out.
▶ Immediate measure: mix a tablespoon of fabric
softener with 0.5 l of water and pour this mixture into
the manual dosing compartment (not for outdoor,
sportswear and down textiles).
▶
When the intelligent dosing is activated, reduce the
basic dosing amount
→ Page 37.
▶
When dosing manually, reduce the amount of
detergent for the next wash with an equal load.
Unauthorized extension mounted on the water drain
hose.
▶
Remove any unauthorized extensions from the
water drain hose.
→
"Connecting the device", page 16
Pump cover is not fully screwed in.
▶
Make sure that the pump cover is screwed into the
device as far as it will go. The pump cover handle
must be vertical.
No water flows into
the device. The
detergent was not
washed in.
Start/Refill was not pressed.
▶
PressStart/Refill
.
Strainer in the water supply is clogged.
▶ Clean the strainer in the water supply.
Water tap is closed.
▶
Open the water tap.
Water supply hose is kinked or pinched.
▶
Make sure that the water supply hose is not
kinked or pinched.
Start several times
with centrifugation.
The imbalance control system eliminates the
imbalance by distributing the laundry several times.
▶
No error - no action required.
Remark:When loading, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
The program duration
changes during the wash
cycle.
The program sequence is electronically optimized. This
may lead to changes in the program duration.
▶
No error - no action required.
The imbalance control system eliminates the
imbalance by distributing the laundry several times.
50