en
Basic operation
48
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.
Note:
Observe the information about
detergents and care products.
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.7 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Inicio/Pausa+Carga
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
13.8 Adding laundry
Note:
Observe the information on
1.
Press
Inicio/Pausa+Carga
.
The appliance pauses.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press
Inicio/Pausa+Carga
.
13.9 Cancelling the pro-
gramme
Note:
Observe the information on
1.
Press
Inicio/Pausa+Carga
.
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse/Freshen Up
pro-
gramme.
– If the water level is high, start
the
Spin
programme or select a
suitable programme for draining.
→
3.
13.10 Resuming the pro-
gramme when the pro-
gramme status is Rinse
Hold
1.
Set the
Spin
or
Drain
programme.
2.
Press
Inicio/Pausa+Carga
.
13.11 Unloading the laundry
Note:
Observe the information on
1.
Open the appliance door.
2.
Remove the laundry.
13.12 Switching off the appli-
ance
1.
Press .
2.
Wipe the rubber gasket dry and re-
move any foreign objects.