5
6
a
a
a
a
a
$
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
a
$
~
ʋ
ʋ
ʋ
ʋ
Display information, Option buttons
ʑ
Display Information
þü
wash: Not on if
Å
Spin/Empty
>
is selected
flashing: too much detergent used
a
page 13
2
ü
Rinse: Not on if
Å
Spin/Empty
>
is selected
Å
Spin: Not on if “
” Rinse hold is selected
ü
On: the door can be opened;
flashing (after programme starts): the door was not closed correctly
(
On: childproof lock is activated;
flashing: the setting was changed
a
page 6
800 : Default spin speed of the programme
: Special symbol
a
page 5
Special symbol
1:30: Expected programme duration
24 h: Select Finish in time
>
: End of programme
§
:
³µ
: Fault displays
a
page 11
§
,
ǯ
: “YES” if the door can be opened or “NO” if it cannot be
opened during “Pause” period
ʑ
Option buttons
Spin speed
Å
You can change the indicated spin speed. The maximum spin speed which can be selected
depends on the chosen programme. You can also set “
”
a
Special symbol
Finish in time
Before a programme starts, you can specify by how many hours later the programme is to be
ended.
– Press
button until the required number of hours is shown. The Finish in time can be set
in hour increments up to a maximum of 24 hours.
– Press
Start
/
Soaking
$
, the Finish in time starts counting down.
You can pause the programme to open the door even if the Finish in time is active.
ʑ
Special symbol
– Except for the
Å
Spin/Empty
>
programmes, press the
Å
button to set “
” (Rinse hold);
the load is held in the final rinsing water. When the programme has ended, “
” appear.
Select programme
Å
Spin/Empty
>
or directly press
Å
to select spin speed to spin the
laundry.
–
When the
Å
Spin/Empty
>
programme is selected
, press the
Å
button to set “
”, the
programme is then defined as
Empty
; If “
” is not set, the programme is defined as
Spin
.
– When the
Empty
>
programmes has ended,
“
” and “
ü
” appears on the display field,
it means the whole process is finished.
Additional functions
ʑ
Buttons for additional functions
In addition to the programme if required
Speed Wash
ē
Shorten the washing time. For slightly soiled items.
If the function is selected, programme duration and max. load will be
changed.
Rinse plus
2
Additional rinse cycles,extended washing time.
For areas with very soft water or for further improvement of the rinsing
result.
ʑ
Childproof lock
Programme will not be changed by accidental operation.
– Activating the childproof lock: After the programme starts, press
Start
/
Soaking
$
and hold
down for 5 seconds until the
(
ü
symbol is displayed.
The
(
ü
symbol flashes if any setting is inadvertently changed.
– Deactivating the childproof lock: Press
Start
/
Soaking
$
and hold down for 5 seconds until
the
(
ü
symbol goes out.
– If the programme is ended or any setting is changed, deactivate the childproof lock.
– If the programme is changed while the childproof lock is activated, the
(
ü
symbol flashes,
the programme which is running will continue.
– If the childproof lock is deactivated while the programme selector is in a different position
from when the childproof lock was activated, the programme which is currently running be
halted.
ʑ
Soaking
Load washing of the same colour.
Pour soaking agent/detergent into dispenser
II
according to the manufacturer’s instructions.
Set programme selector to
Cottons
L
ü
40 °C
and select
Start
/Soaking
$
. After approx.
10 minutes press Start/
Soaking
$
to stop the programme. After the required soaking time
re-press
Start
/Soaking
$
, if the programme is to be continued or change the programme.
ʑ
Signal
*
If required, set the volume
repeatedly.
ʑ
Sleep mode
If you do not operate the machine for about five minutes after selecting the programme or
programme end, the display information goes out to save power.
– If required, press any button, and all information will be displayed again.
+
directly
~
Open the washing machine door and remove the laundry.
a
>
a
a
$
a
$
ʋ
ǯ
ʋ
§
ʋ
ǯ
$
a
Å
>
$
Set to
Off
Press
Å
and
hold and
1 step
clockwise
Release the
button to find
the number
1. Start the signal
mode
2. Set volume for...
Button feedback
signals
Information
signals
set volume
*
set volume
*
1 step
clockwise
Set to
Off
for programme status
Display Information
Display information
depends on the
chosen programme
ઁ
~
ॕ
L
ॕ
ॕ
O
:
ॕ
I
ॕ
1
ॕ
ॕ
Å
>
a
2