Cleaning and maintenance
en
33
AquaSensor
depending on the model
During the rinse cycle, the AquaSensor
checks the degree of turbidity (turbidity
is caused by dirt and detergent residue)
of the rinsing water. The duration and
the number of rinse cycles depend on
the turbidity of the water.
2
Cleaning and
maintenance
Cl
ean
ing
and
mai
nt
ena
nc
e
:
Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and pull out the
mains plug.
:
Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Prevent detergent residue from
building up and odours from forming
by following these instructions:
Notes
■
Ensure the room in which the
washing machine is set up is well
ventilated.
■
Leave the door and detergent
dispenser tray open slightly when
the washing machine is not in use.
■
Occasionally run a wash using the
Cottons 60 °C
programme and
powder detergent.
Machine housing/control
panel
■
Wipe the housing and the control
panel with a soft, damp cloth.
■
Remove the detergent residue
immediately.
■
Do not clean with a water jet.
Drum
Use chlorine-free cleaning agents, do
not use steel wool.
If there are odours in the washing
machine, or to clean the drum, run the
Drum Clean
90 °C
programme without
laundry. Add washing powder.
Descaling
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from
customer services.