en
Overview of programmes
32
'
Rinse /
0
Spin /
[
Drain
Combined extra programme for rinsing and spinning the laundry,
and draining the rinsing water
Note: .
The
Rinse Plus
Z
button is activated at the factory for
this programme.
If you only want to spin the laundry
: Deactivate the
Rinse Plus
Z
button and, if required, adjust the spin speed.
If you only want to drain the water
: Deactivate the
Rinse Plus
Z
button and select the spin speed
0
.
-
-
$
, 0 - 1600** rpm
Rinse Plus
Z
,
Easy-iron
p
ActiveOxygen Refresh
Ø
Mixed load of cottons, synthetic fabrics, silk, satin and wool;
programme for removing odours, e.g. the smell of cigarettes and
Notes
■
Do not exceed the maximum load.
■
Not a wash programme/not suitable for removing stains or
sweat.
■
Load dry laundry only.
■
Before loading the laundry, wipe the drum dry if necessary,
turning it as you do so to remove all water.
Max. 1 kg
-
-
-
Û
Drum clean
Programme for cleaning and caring for the drum and the outer
tub
Run the programme, e.g.:
■
Before using the appliance for the first time,
■
If you regularly wash at low temperatures (40 °C or lower) or
■
If you have been away for an extended period and odours
have built up.
Notes
■
The
Û
Drum clean
indicator light will flash if you have not
used a programme at 60 °C or higher for a long time.
■
Run the programme without laundry.
■
Use standard washing powder or a detergent containing
bleach. To prevent foaming, only use half the amount of
detergent recommended by the detergent manufacturer. Do
not use detergents intended for woollens or delicates.
0 kg
80, 90 °C
1200 rpm
Active Oxygen
Ø
Programme/type of laundry/information
Settings
* Reduced load for the
SpeedPerfect
G
setting
** Max. spin speed depends on the model
*** Programme depends on the model
****Can be selected for washing temperatures up to 40 °C
