Bosch WAW285H2UC, Инструкция по использованию и уходу / Руководство по установке

Страница: 16 / 48

16
Position hoses as shown when routing hoses to right
side of washer (facing from front).
Position hoses as shown when routing hoses to left side
of washer (facing from front).
About the AquaShield™ Hose
The AquaShield hose prevents potential flooding in the
event the hose develops an internal leak. If the hose
leaks, the indicator turns red and water flow is blocked.
Once the internal valve in the hose activates (indicator is
red) the hose must be discarded. Contact Customer
Service to purchase a replacement.
AquaStop® Plus
The AquaStop Plus feature detects water leaks on the
internal base, shuts down operation and automatically
pumps out water so it cannot make contact with the floor.
This feature along with the internal mechanical valve of
the double-walled AquaShield hose makes AquaStop
Plus one of the most comprehensive water safety
systems available.
Water drain hose connection
NOTICES
▯
Do not reuse an old drain hose. Only use the drain
hose and parts included with your washer.
▯
Do not kink or modify the water drain hose.
Height of drain point
Height difference between the floor and drainage point:
max. 39 in. (100 cm).
Types of drainage hookups
Standpipe
Attach the drain hose to the elbow included with your
washer.
Position the elbow on the drain hose 4" from end of hose
as shown. Insert this section of the drain hose into the
drain pipe. Secure the elbow and hose with a nylon tie
strap or the equivalent to keep the hose from coming out
of the drain pipe during use.
LQ
FDEOHWLH
GUDLQ
SLSH