background image

en

    Safety instructions

6

:

Warning

Risk of suffocation!

If allowed to play with the 

packaging/plastic film or 

packing components, children 

may become caught in these or 

pull them over their heads and 

suffocate. 

Keep packaging, plastic film 

and packing components away 

from children.

:

Warning

Risk of poisoning!

Detergents and care products 

may result in poisoning if 

consumed.

If accidentally swallowed, seek 

medical advice. Keep 

detergents and care products 

out of the reach of children.

:

Warning

Risk of burns!

When washing at high 

temperatures, the glass in the 

appliance door becomes hot.

Stop children from touching the 

appliance door when it is hot.

:

Warning

Eye/skin irritation!

Contact with detergents or care 

products may cause eye/skin 

irritation.

Rinse eyes/skin thoroughly if 

they/it come(s) into contact 

with detergents or care 

products. Keep detergents and 

care products out of the reach 

of children.

Installation

:

Warning

Risk of electric shock/fire/

material damage/damage to 

the appliance!

If the appliance is not installed 

properly, this may lead to a 

dangerous situation. Ensure 

the following:

The mains voltage on your 

power socket must match 

the rated voltage specified 

on the appliance 

(identification plate). The 

connected loads and the 

required fuse protection are 

specified on the identification 

plate.

The appliance must only be 

connected to alternating 

voltage via a protective 

contact socket that has been 

correctly installed. This plug 

socket must be freely 

accessible at all times.

The mains plug and the 

protective contact socket 

must match and the earthing 

system must be correctly 

installed.

The installation must have an 

adequate cross section.

Содержание WAW24469IL





















































Отзывы: