manualshive.com logo in svg

Bosch WAW20460IL, Инструкция по эксплуатации и руководство по установке, Страница: 41 / 44

Поделиться
Скачать
Bosch WAW20460IL Скачать руководство пользователя страница 41

Positioning and connecting       

en

41

Transportation

E.g. when moving house

Preparatory work:

1.

Turn off the tap.

2.

Reduce the water pressure in the 

supply hose: 

~

 Page 27

; Cleaning 

and maintenance – filter in the water 

supply blocked

3.

Disconnect the washing machine 

from the mains.

4.

Drain the remaining water: 

~

 Page 26

; cleaning and 

maintenance – the drain pump is 

blocked, emergency draining

5.

Remove the hoses.

Installing the transport braces:

1.

Remove the covers and keep them 

in a safe place.

Use a screwdriver if necessary.

2.

Insert all four sleeves.

Clip the mains cable securely in the 

holders. Insert and tighten the 

screws.

Before switching on the appliance 

again:

Notes

■

The transport braces 

must

 be 

removed. 

■

Pour approx. 1 litre of water into 

compartment 

II

, select the 

Empty 

 

programme and start.

This will prevent detergent from 

flowing unused into the drain during 

the next wash.

Содержание WAW20460IL













































Отзывы:

Нет отзывов