Home Connect
NL
a The device is connecting
with the Smart Energy system
(energy manager).
aWhen on the display con and
is displayed, the device has
successfully connected to the
energy manager.
expiry of the set time period. The
program ends when this time
frame is over.
Onote
The Flex Start is deactivated
for safety reasons under the
following circumstances:
4.
If the device is to be started by the
Smart Energy system (energy
manager), activate Flexstart.
"Activating Flexstart", Page 45
¡ Press Start/Refill
.
¡ Open the door.
¡ Turn off the device.
¡ Power cut.
Activate Flexstart
Activate Flexstart so that your Smart
Energy system (energy manager) can
start your device when your own PV
system generates sufficient energy or
the electricity tariff is low.
15.5 Activate WiFi on the device
Note: The energy consumption
increases compared to the values
indicated in the consumption value
tables when Wi-Fi is activated.
Required: The Smart Energy system
(energy manager) can only start the
device when the Smart Energy
system (energy manager) and the
device are connected.
1.
Approx. 3 s onControl via App
pressure-
know.
2.
Set program to position 4.
1.
Set the desired programme.
a The display shows Con reflected
to give.
2.
Press - Ready in + and set the
3.
Press Start/Refill
until
the display on displays.
desired time period.
3.
Press Start/Refill
4.
Press Control via App
.
.
aWiFi is activated.
a The display shows
raat is waiting for a remote start
(energy manager).
giving the time to eg 8 h system
(energy manager) starts a
standby.
tem (energy manager) the device
starts, then the device starts it
on and the
Flexstart is activated. the app-
Note: The device does not turn off
automatically when WiFi is activated.
via the Smart Energy system
aWhen the display shows the weather
then the Smart Energy has set the
time when the appliance
aWhen the Smart Energy system
do not run program independently
within the set time, for the
15.6 Deactivate WiFi on the
device
1.
On for at least 3 seconds Operate
to press.
via App
2.
Set program to position 4.
a The display shows Con reflected
to give.
3.
Press Start/Refill
until
the display OFF displays.
aWiFi is deactivated.
45