NL Home Connect
1.
Set the program to level 3.
a The display shows APP reflected
to give.
2.
Press Start/Refill
.
a The device is connecting
with the Home Connect app.
3.
As soon as the appliance is in the Ho-
me Connect app is displayed,
follow the last steps in the Home
Connect app.
5.
Open the Home Connect app on the
mobile end device and follow the
steps in the app.
aWhen the display con weather-
the device is connected to the
Home Connect app.
6.
Enter the network name (SSID)
and password (Key) of your home
network in the Home Connect
app.
15.4 Connecting the device
to the energy manager
7.
Follow the steps in the Home
Connect app to connect the
appliance.
When you connect the appliance to
the Smart Energy system (energy
manager), you optimize the energy
consumption. The device will not start
until your own PV system generates
sufficient energy or if the electricity
tariff is favorable.
aWhen on the display con is becoming
displayed and permanent
lights up, the device is
connected to the home network.
8.
When on the display err is
displayed, the device is not
connected to the home network.
Requirements
¡ The Smart Energy System (Ener-
giemanager) uses the
communication standard of the
EEBus initiative.
¡ You have in the user manual
of the Smart Energy System (Energy
Manager) how the Smart Energy
System (the Energy Manager)
connects to your appliance.
-
Check if your device is within
range of the home network.
-
Reconnect the device to WLAN
home network (WiFi) with WPS
function.
9.
Connecting the appliance to the
1.
Approx. 3 s onControl via App
pressure-
know.
15.3 Connecting the appliance to
the Home Connect app
a The display shows auto reflected
to give.
Requirements
2.
Set program to position 7.
¡ The device is connected to the
WiFi home network.
¡ The Home Connect app is open
and you have signed up.
a The display shows Spooky reflected
to give.
3.
On Start/Refill
to press.
44