en
Basic operation
40
Setting a programme
1.
Set the programme selector to the
required "programme" →
2.
If necessary, "adjust the pro-
gramme settings" →
Adjusting the programme set-
tings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note:
Overview of all programme set-
tings:
Requirement:
A programme has
been set.
▶
Adjust the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
Note:
The setting is saved if you ac-
tivate or deactivate the intelligent
dosing system.
Saving the programme set-
tings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡
A programme has been set.
¡
The programme settings have
been adjusted.
▶
Press and hold for approx. 3
seconds.
Press to call up the saved pro-
gramme.
Note:
To overwrite the saved pro-
gramme, repeat the steps above.
Loading laundry
Notes
¡
Please read the information in the
"Safety" →
tions to ensure that you use the
appliance safely.
¡
To prevent creasing, take note of
the maximum load for the relevant
"programme" →
Requirement:
Prepare and sort the
laundry.
→
1.
Open the door.
2.
Ensure that the drum is empty.
3.
Separate the laundry and place it
in the drum.
4.
Note:
Ensure that there is no laun-
dry trapped in the door.
Close the door.
Содержание WAU28PAHSN
Страница 71: ......