Intelligent dosing system
en
43
¡
If you want to use both dispensers
for liquid detergent, adjust the
"contents of the dispenser"
→
Requirement:
/ flashes.
1.
Pull out the detergent drawer.
2.
Open the dispenser lid.
3.
Pour liquid detergent and fabric
softener into the relevant dis-
pensers.
→
4.
Close the dispenser lid.
Note:
To prevent the detergent
from drying out or drying up, do
not leave the dispenser lid open
for a long period of time.
5.
Push in the detergent drawer.
6.
Dispenser contents
When it leaves the factory, the dis-
penser is set for fabric softener .
Alternatively, you can also use this
dispenser for a second liquid deter-
gent .
Notes
¡
If you change the content of the
dispenser, the basic dosage for
this dispenser is reset.
¡
If you use both dispensers for li-
quid detergent, you must select a
dispenser which is to be used dur-
ing washing.
Adjusting the dispenser contents
1.
Press and hold
i-DOS
for ap-
prox. 3 seconds.
2.
To set , press
i-DOS
.
a
The display shows .
3.
To set , press
i-DOS
again.
4.
To end the setting process, wait
briefly.
Basic dosage
You can adjust the preset basic
dosages for liquid detergent and fab-
ric softener.
The basic dosage depends on the
manufacturer's instructions for the de-
tergent, the water hardness and the
degree of soiling of the laundry.
Always set a basic dosage that cor-
responds to the dosage for a stand-
ard load of 4.5 kg.
→
Adjusting the basic dosage
You can individually adjust the basic
dosages for each dispenser.
1.
Press and hold
i-DOS
for ap-
prox. 3 seconds.
a
The display shows the basic
dosage set for .
2.
To adjust the setting, press / .
Содержание WAU28PAHSN
Страница 71: ......